1、Upper and lower buckle boxes
The production of a gift box with a top and bottom lid is relatively simple. It consists of two parts: the top lid and the bottom, making it easy for standardized machine operation. The size of the top lid is slightly larger than the size of the bottom, and when used together, the best state of the gift box is that the bottom bottom can slowly and freely fall off. The upper and lower buttons of the box can be designed to cover the bottom of the box or cover a part of the bottom box. As shown in the following figure:
2、Box with rotating frame
In addition to the upper cover and lower bottom, there is also an additional frame in the middle for the production of the edge cover gift box. The size of the cover box is the same as that of the bottom box, and there are equally high edges on the inner four sides of the bottom box, so that there will be no displacement when the cover box matches the bottom box. The production of the edge cover gift box is more three-dimensional and layered in terms of visual effect; The cover box with a surrounding edge can be designed to have the same height as the bottom box, or the height of the top cover can be smaller than the height of the bottom cover. As shown in the following figure:
3、Conjoined box
The production of a connected gift box is similar to that of a box with a cover around the edge. The difference is that the back of the gift box is pasted with tissue paper, and the left and right sides of the gift box are usually connected with ribbons, which can be freely flipped back and forth to open and close. As shown in the following figure:
